Difference between revisions of "Category:Dyes"

From The Wajas Wiki
(Created page with "Category:Items")
 
Line 1: Line 1:
 
[[Category:Items]]
 
[[Category:Items]]
 +
Dyes are items used to place a new marking on a waja, and can be used on any waja at any time.  The name of the dye refers to the name of the marking it adds.  Restockable dyes are available in the [[Dye Shop]].  All other dyes are re-released occasionally in the CWP shop but otherwise must be obtained through the [[Shop Search]].  Once added, a dye cannot be completely removed (though you can re-dye the same marking to change the color or opacity of the marking.)
 +
 +
===Applying a Dye===
 +
To apply a dye to a waja, first click on the dye in your inventory and select "Use".  You will be prompted to choose the waja you want to use the dye on.  Select the waja you want and you will be presented with a page similar to the custom demo or custom creation page.  Here you will choose the hex color you want the dye to be (it defaults to FFFFFF white), the strength/opacity you want it to be (it defaults to 100%), and the layer you want the dye marking to be placed on.  At any time you can press "Preview" to see what the waja will look like once the dye is applied at the current layer/strength/color.  Once you're satisfied, press "Create" and the waja will be dyed.
 +
 +
Note:When using a dye marking, the layer order is actually from the bottom up. Thus, if you place a marking at the top of the list it will be the first marking applied to the Waja. Subsequent markings will be layered on top of it. Adding a marking to the very top of the list will actually set the marking on the very bottom of the Waja.

Revision as of 23:52, 21 January 2011

Dyes are items used to place a new marking on a waja, and can be used on any waja at any time. The name of the dye refers to the name of the marking it adds. Restockable dyes are available in the Dye Shop. All other dyes are re-released occasionally in the CWP shop but otherwise must be obtained through the Shop Search. Once added, a dye cannot be completely removed (though you can re-dye the same marking to change the color or opacity of the marking.)

Applying a Dye

To apply a dye to a waja, first click on the dye in your inventory and select "Use". You will be prompted to choose the waja you want to use the dye on. Select the waja you want and you will be presented with a page similar to the custom demo or custom creation page. Here you will choose the hex color you want the dye to be (it defaults to FFFFFF white), the strength/opacity you want it to be (it defaults to 100%), and the layer you want the dye marking to be placed on. At any time you can press "Preview" to see what the waja will look like once the dye is applied at the current layer/strength/color. Once you're satisfied, press "Create" and the waja will be dyed.

Note:When using a dye marking, the layer order is actually from the bottom up. Thus, if you place a marking at the top of the list it will be the first marking applied to the Waja. Subsequent markings will be layered on top of it. Adding a marking to the very top of the list will actually set the marking on the very bottom of the Waja.

Pages in category "Dyes"

The following 95 pages are in this category, out of 314 total.

(previous page) (next page)(previous page) (next page)